www.primajayamandiri.com, specializer for automatic door and security system

#2 of 16 | prev product Prev - Next next product
printer email

product arrow AUTOMATIC DOOR MICOM EDM MD JAPAN

Introduction

EDM-MD automatic sliding door operators forms the basis to any door automation solution. Equipped with our trademark microprocessor control and motor drive system, EDM-MD will adapt effortlessly to varied door widths and weight capacities up to 100kg per leaf.


Ease of Installation

  • With modular plug-in parts installed directly from the front onto our base rail, any component can be moved during or after installation. Components can added or replaced with ease, therefore time spent on installation or servicing is greatly reduced.

EDM MD Operator_2

 

EDM-MD Operator

  1. Idle belt pulley & belt tightening bracket
  2. Belt bracket link (double)
  3. Control box
  4. Connection harness
  5. Motor gear box with vibration proof rubber
  6. Connection terminal
  7. Hanger roller bracket with double roller
  8. End stopper
  9. Base rail
  10. Power On/Off switch

Full Door Control

  • From the very first power on, door optimization is automatic. Utilizing the LED Digital input display provided as standard, all parameters can be adjusted easily (without the need for any hand held PALM or expensive software). Access to operational history, cycle count and error analysis is also possible. Door parameter data can be reset to factory default settings when required.

Control Panel & Adjustment

MD_Cbox

  1. Power Input Plug-in 200-240VAC
  2. Slide Switch – RUN or PROGRAM Mode
  3. LED Display
  4. 4 DIP Switch
    Sw1- Opening Direction
    Sw2 – RS Function (Flip Flop)
    Sw3 – CE (Close End) Signal Output
    Sw4 – E-Lock
  5. Motor Plug in
  6. Sensor harness Plug in
  7. Test Button
  8. Up – Parameter Adjustment
  9. SET – Value Adjustment
    (Reset when UP & SET push together)

 

  • INPUT ON LED – Red when activation signal is receivedMD control box_2
  • POWER ON LED – Red when power is on
  • Digital LED Display – Visual display provided for operational setting and adjustment
  • Buzzer – Audible indication of error status (optional)
  • Progamme / Run Switch – Utilized to enter the programming mode
  • Programme Buttons – Provides stepped access to parameters, functions, applications and values
  • DIP Switch – Quickly adjust open direction between Right, Left or Double door

Summary

Control BoxMD_Cbox_2

  • Function & Parameter Adjustment – Microprocessor technology
    provides exact door control, wide function input options and digital setting adjustment.
  • Memory – Long term memory retention of operational parameters when mains power is off.

Function Summary

  • Digital Input Programming
  • Wide Operational Parameter Setting
  • Memorised one time door stroke
  • Easily accessible inputs
  • 24V DC Power Output for Accessories
  • System Error Diagnosis
  • Door Speed & Braking Adjustment
  • Energy Saving (% Open) Function
  • Press Open / Close against frame
  • Open / Close brake point adjustment
  • Delay Function for Electric Lock
  • Ratchet or Flip-Flop Function
  • Sensor / Activation Signal (SS)
  • Threshold Protection (SB)
  • Hold Open (HO)
  • Emergency Stop (ES)
  • Panic Open (PS)
  • Partial Open (HS)
  • Side Screen Safety (AS)

Motor GearMD MG Img_3

 

  • Compact and powerful motor. High speed acceleration and deceleration is controlled. MICOM enclosed hypoid brushless motor gear ensures safe and long term reliable operation for enhanced operational cost efficiency.
  • High speed Motor control (500mm/s)
  • 100kg~120kg load capacity
  • Compact high precision gear box
  • Controlled acceleration and braking
  • Smooth and controlled operation

 


Monitoring & Safety (SMB Option)

SMB is a SENSOR & BATTERY MONITORING SYSTEM which offers compliance with EU Standard EN16005. A modular system for enhanced automatic door safety.

  • Easy installation & wiring
  • Multi-functional features
  • Individual sensor monitoring
  • Battery open with monitoring
  • 4 Position key function selector
  • Individual sensor input
  • LED mode & error indicator
  • Emergency open input
  • 24VAC Power input (Isolated Transformer)
  • Night switch Input
  • Electromagnetic lock functionsSMB Parts

 

SMB Features

  1. Signal Input Connection
  2. External Sensor Input
  3. Internal Sensor Input
  4. LED Monitoring Error & Battery Indicator
  5. DIP Switch – Sensor & Battery Monitoring On / Off
  6. E-Lock Timer
  7. Side Screen Input 1
  8. Side Screen Input 2
  9. Battery Pack
  10. Selector Switch Connection
  11. E-Lock Input / Output
  12. Battery Connector (Not shown)

 

Key Selector Switch

  • A Rotary Key function selector switch is supplied together with SMB.
  • Connected into the SMB hub, all signals are controlled for greater ease of operation.
  • Specifically designed so selection can only be performed by authorised personnel using secure key provided.
  • SMB will not function without our selector as it is an integral part of our safety in design.

Key Selector Switchsmb key selector

1. Closed / 2. Exit / 3. Automatic / 4. Hold Open (Emergency – Anti Panic & Exit – Option)


Electromagnetic Locking System

  • Used with EDM-MD Control box standard output – E-Lock Fail Secure (LK1) available.
  • Used with SMB (Sensor Monitoring Board) as above – E-Lock Fail Secure (LK1) & Fail Safe (LK2) available.

Rotary Selector Switch (Option)

EDM-MD can accept a stand alone Rotary Selector switch.

 

Rotary knob_img_2

1. Closed / 2. Exit / 3. Automatic / 4. Hold Open (Exit – Option)


Delivery

EDM-MD – Available from within Europe in formats as follows:

  • ‘COMPLETE OPERATOR’ consisting of: Base Rail, Cover, Control Box, Motor Gear Box, End Covers, Tooth Belt, Belt Bracket Link Assembly, Belt Connection Single & Double Door, Idle Pulley Assembly, Hanger Roller Brackets x4 and Stoppers
    (COMPLETE OPERATOR – Standard Rail Length: Single Leaf – up to 3000mm, Double leaf –  up to 6000mm)
  • ‘FULL KIT’ – (Without Rail & Cover) consisting of: Control Box, Motor Gear Box, Tooth Belt (7M), Belt Bracket Link Assembly, Belt Connection Single & Double Door, Idle Pulley Assembly, Hanger Roller Brackets x4 and stoppers
  • RAIL & COVER – (Material Only) – Standard Length: up to 6000mm Available.

Accessories

When used with SMB, EDM MD can be use with a new range of European Standard (EN16005) sensors such as BEA IXIO-S & Optex 0A-Axis-T.

oa-axis-t-520x225VIO-D_3-4_mini

When used without SMB, EDM MD can also accept all current sensors available in the world market today, such as BEA Eagle & Optex OA-203C together with threshold safety beam protection.

safetybeam_img_7

eagle

Model EDM-MD-S EDM-MD-D
Application Single Double
Door Weight (max) 100kg 100kg x2
Manual Force –
During Power Failure
24.5 ~ 39.2N (2.5 ~ 4kgf) 29.4 ~ 49.0N (3~5kgf)
Power Consumption 200 -240V AC, 0.7A
Power Output 24V DC, 300mA
Motor Power 55-60 Watt
Motor Type DC 24V / 55W Brushless
Rated Operation 1 million opening and closing cycle test completed
Open Door Speed Adjustable 160 - 500mm/s
Close Door Speed Adjustable 160 - 400mm/s
Brake Adjustment 0-F value (16 steps adjustable)
Partial Open 35%, 50%, 65%, 80% (4 steps adjustable)
Operating Temp & Humidity 0°C – 50°C / 30% - 85%